Panasonic Microwave Trim Kit for NN-SF574S Microwave Model, Stainless Steel (NN-TK510FSQP)

The best way to achieve an elegant kitchen. Panasonic microwave ovens come in a large variety of models. Regardless of the one you choose, there is a Trim Kit available to easily turn it into a stylish, built-in unit. Microwave ovens should not be built into a unit directly above a top front venting conventional cooker. This trim kit can be installed into a cabinet. The cabinet opening must have the following internal dimensions as shown. A vent is required at the rear of the cabinet it should travel the full height of the cabinet and the cabinet should not be obstructed. Minimum dimension of vent45 mm x 562 mm. Minimum installation height 850 mm. 2. Electrical Connections. The appliance is supplied with a mains plug attached and should only be connected into an earthed socket that has been installed according to the relevant safety regulations. If the plug is no longer accessible after the appliance has been built into the cabinet, a dual pole isolator must be installed to conform to the relevant safety standards. 3. It is essential that the cabinet is fixed to the wall for stability. The shelf must be able to support a weight of 30 kg. 4. If the microwave oven is to be removed from the kitchen cabinet and used free standing, the built in parts must be removed, and the oven returned to its original condition. Keep these installation instructions for future reference so the installation process can be reversed. Take care to kink or trap the microwave electrical cable. The diagram may vary from the actual unit and is only for your reference.