Expired180PCS Solder Seal Connectors,YEESON Waterproof Automotive Solder Seal Wire Connector Kit Electrical Wire Terminals for

Specification:
Colour: Red Blue Yellow White
Terminal: Butt Terminal
Material: PE,Tin
Brand:YEESON
Shrinkage ratio:2:1
Operating temperature range:
Minimum shrink temperature: 80°C /176℉
Minimum temperature for solder to melt: 138°C /280.4℉
Operating temperature :-55℃ /-67℉- 125℃ /257℉

More Features:
1: The internal barrel offers enhanced electrical conductivity for better performance.
2: We use thick and sturdy tubing is resistant to punctures, ideal for long term use.
3: Our wire terminal connector kit is colour coded so you can easily differentiate between the sizes.
4: Ideal for both automobile and marine vehicles including boats, cars and even wire terminals, with compact size they can efficiently be used even in tight spaces.
5:No need crimping, do not need crimping tools , just need a heat gun, then you can make a perfect connecting.

How to use:
1.Choose the right size of connectors of what you want, strip the two wires that going to connect.
2.Thread the connector to one of the wires and then twist the two conductor together, Insert the wires into the solder seal sleeves.
3.Move the connector to the middle of the conductor.
4.Use the heat gun to heat the solder, the tin ring, rotate it while
heating, until it is melted. Then use the heat gun to heat the hot melt waterproof adhesive until it shrinks tightly.

Note:
1.Some of our customers can use lighter to finish the joint, but we recommend that it is better to use a heat gun with nozzle to heat shrink the connector.
2..Please rotate the wire when you are heating or surround the wire to heat so that tube was heated evenly.
3.Please noted the temperature below means the surface of wire connector not the heat gun.
4.Do not set high temperature at beginning, or the surface of connector will be over-heated.