CEST LAVIE Mini Heat Gun, 300W 220V Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay,

Mini hot air gun is a perfect tool for DIY craft works.
embossing powder,
heat-shrinkable film,
clay,
bump,
rubber stamp,
fast-drying paint,
glue,
catalytic adhesive bonding,
rapid thawing,
shrink PVC for packaging,
seal wax patterning,
DIY handmade soap or candle.

Notify:
Just keep 5-6 cm distance from your amazing work and to heat it at about a 45° angle until completed.
With the 45° it can avoid heat suck.
After completion, use the heat gun at high temperature to blow a few minutes. It not only can add its hardness, but also its brightness.

General Features:
Size: 225*50mm / 8.85*1.96inches, wire length 90cm/35.43inchs
Type: Constant temperature
Working temperature: About 200°C / 390°F
Rated power: 300W
Plug Type: AU Plug
Rated voltage:220V
Power:50Hz

Package:
1*Hot Air Gun
1*Detailed Instructions

Notes:

1.In order to avoid hazard, please kindly read the instruction before using.
2. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
3. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
4. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
5. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.
8. Do not use in presence of an explosive atmosphere.
9.Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!