FORScan OBD2 Adapter USB ELM327 Scanner Compatible with Ford F150 F250, Automatic (MS/HS) CAN Switching OBDII Diagnostic Scan

Ford OBD2 scanner Functions:
Read/erase fault codes from ALL modules (such as Focus, Mondeo/Fusion, Kuga, S-Max, C-Max, Transit, Ranger, F150 etc )
Access modules on both HS-CAN and MS-CAN mode
Read vehicle configuration, actuator tests
Live Data: Air Flow Rate, Engine RPM, Vehicle Speed, Intake Air Temperature
Injector coding, programming, coding, adaptations
Service procedures
Force DPF regeneration
Oxygen Sensors
Fuel System status
Long /Short Term Fuel Trim

Supported Modules:
PCM TCM APIM DCDC PAM HCM BCMII SODR SODL FCIM TRM RGTM RTM PDM DDM HSWM GPSM DSM FDSM ABS RCM PSCM SCCM GWM IPMA and many others

FORScan OBD2 Adapter Supported Software:
Forscan (The ultimate hidden scan tool software. You can access the Global Window feature, Bambi Mod, reverse tilt mirrors,
tire size correction, Perpendicular Park, Secure Idle, 5 turn signal flash, heated steering wheel, disabled double horn honk,
disabled door ajar chime, and many more! )
ELMconfig
FoCCCus
FF2

Modified ELM327 interface-Special for Ford/Mazda :

Please NOTE: many Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This obd2 adapter has been modified to allow it to implement the MS CAN bus.

ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.