Car Clay Mitt, Car Clay Bar Mitt, Surface Prep Mitt, Finish Clay Bar Mitt Wash Mitt Clay Eraser Mitt for Car Detailing and

Clay Mitt, Car Clay Bar Mitt, Surface Prep Mitt, Wash Mitt Clay Eraser Mitt for Car Detailing and Polishing Clay Bar Tool & Kit

Features:
Quickly and effectively remove surface contaminants
Save time and labor compared with a traditional detailing clay
Safe and gentle for the car paint
Result in a silky smooth paint finish
Up to 60 applications and more(depending on the condition of your car and the correct using and storage way)
Clay surface: 6"× 8.7"

How To Use:
1. Thoroughly wash the vehicle to remove all loose surface contaminants prior to use.
2. Spray a mild lubricant on the working area of the vehicle's surface before using clay mitt. Lubricant is very important while using the Clay Mitt, must not be strong acid or alkali or glue-dispenser solvent.
3. Scrub the lubricated areas with light pressure(using the weight of your hand only) until the contaminants be removed, and you feel that it is silky smooth(there will be a noticeable difference).
4. Repeat step 2 and step 3 on the surface stains until completely treated.
5. Wipe away the lubricant or dirty water
6. Dry the vehicle with a clean microfiber towel and wash the clay mitt with soap and water and air dry

Care and Storage:
DO NOT dry in the sun---ONLY Air Dry
DO NOT use on a dirty car---Wash car prior to use
DO NOT apply pressure---Simply glide over the surface using your hand weight
DO NOT store under direct sunlight.
DO NOT use on the surface of the vehicle above 120°F in temperature.
DO NOT use if rubber polymer is tacky and soft.
DO NOT store inside plastic container